Design
Internal:The product is built in.
Logistics data
Harmonized System (HS) code:
85176990
Network
Cable types supported:
Fiber
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full, Half
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Packet forwarding rate (1 Gbps):
14880 pps
Packet forwarding rate (100 Mbps):
148800 pps
Packet forwarding rate (10 Mbps):
1488000 pps
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
100 Mbit/s
Converter output interface:
100Base-FX
Converter input interface:A convertor changes one form of signal into another e.g. A/D Converter changes a signal from analog to digital. A convertor input interface is the place where a convertor connects to the product in order to input the converted signal.
100Base-TX
Maximum data transfer rate:
100 Mbit/s
Networking
Cable types supported:
Fiber
Duplex system:A duplex communication system is a point-to-point system composed of two connected parties or devices that can communicate with one another in both directions, simultaneously.
Full, Half
Auto MDI/MDI-X:A Medium Dependent Interface (MDI) describes the interface (both physical and electrical) in a computer network from a physical layer implementation to the physical medium used to carry the transmission. Ethernet over twisted pair also defines a medium dependent interface crossover (MDIX) interface. Auto-MDIX ports on newer network interfaces detect if the connection would require a crossover, and automatically chooses the MDI or MDIX configuration to properly match the other end of the link.
Packet forwarding rate (1 Gbps):
14880 pps
Packet forwarding rate (100 Mbps):
148800 pps
Packet forwarding rate (10 Mbps):
1488000 pps
Ethernet LAN data rates:The different speed levels of the Ethernet LAN connection.
100 Mbit/s
Converter output interface:
100Base-FX
Converter input interface:A convertor changes one form of signal into another e.g. A/D Converter changes a signal from analog to digital. A convertor input interface is the place where a convertor connects to the product in order to input the converted signal.
100Base-TX
Maximum data transfer rate:
100 Mbit/s
Operational conditions
Operating altitude:
0 - 3048 m
Storage relative humidity (H-H):
5 - 95%
Operating relative humidity (H-H):
5 - 95%
Storage temperature (T-T):The minimum and maximum temperatures at which the product can be safely stored.
-15 - 65 °C
Operating temperature (T-T):The minimum and maximum temperatures at which the product can be safely operated.
0 - 40 °C
Packaging content
Performance
Fiber mode structure:
Multi-mode
Wavelength:The distance over which a wave repeats itself. The wavelength determines the characteristics of the wave e.g. red light has a different wavelength to blue light.
1310 nm
Maximum transfer distance:The greatest distance over which the data/signal can be transferred.
2000 m
Ports & interfaces
DC-in jack:The socket/plug where the DC electricity supply connects to the device.
Fiber optic connector:This terminates the end of an optical fiber, and enables quicker connection and disconnection than splicing. The connectors mechanically couple and align the cores of fibers so light can pass. Better connectors lose very little light due to reflection or misalignment of the fibers. In all there have been about 100 types of optic fiber connectors produced.
SC
Weight & dimensions
Weight:Weight of the product without packaging (net weight). If possible, the net weight is given including standard accessories and supplies. Please note that sometimes the manufacturer leaves out the weight of accessories and/or supplies.
113.39 g
Height:The measurement of the product from head to foot or from base to top.
21.6 mm
Depth:The distance from the front to the back of something.
91.4 mm
Width:The measurement or extent of something from side to side.
31.8 mm
